Antena Satcom / Prodelin 1.2m Ku-Band Rx/Tx Series 1123


Este manual describe el montaje y la instalación de la antena Prodelin 1,2 metros. La antena de 1,2 metros es una montura robusta y fiable que operará en la frecuencia de banda Ku con alta eficiencia y al mismo tiempo resiste con éxito los efectos del medio ambiente.
Estas instrucciones se enumeran por secciones que cubren todas las áreas de montaje e
instalación. Las secciones adicionales se incluyen en el manual para proporcionar información de alineación de antena hacia el satélite y el mantenimiento.

Download Hoja de Datos en PDF


Antena Patriot 0.90m / 1.0m / 1.2m Offset RX/TX Installation & Assembly Instructions

This manual covers the assembly and installation of the .90m/1.0m/1.2m Antenna System. Read this manual thoroughly before beginning assembly. For best results in the assembly process. Perform each step in the same sequence as listed in this manual. Record the serial number of the unit on to page 2 for future reference and read the warranty information. The serial number can be found on the antenna
back structure.

Download Hoja de Datos en PDF

Antena ASC Signal 1.0 m RxTx Class I Type 100TX

The ASC Signal Type 100TX 1.0 m Class I RxTx Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of the reflector is a network of
support ribs which not only strengthens the antenna, but also helps to sustain the
critical parabolic shape necessary for transmit performance.

The heavy gauge steel Az/El mount secures the antenna to any 73-76 mm (2.88”-3.00”) mast and prevents slippage in high winds. A special powder paint process offers excellent protection from weather-related corrosion.

  • All materials comply with EU directive No. 2002/95/EC (RoHS).
  • One-piece precision offset thermosetmolded reflector.
  • Single bolt fine elevation adjustment.
  • Galvanized 19 mm (.75”) O.D. feed support legs.
  • Factory pre-assembled mount.
  • Plated hardware for maximum corrosion resistance.
  • Includes RxTx OMT/Filter assembly.
  • Class I system designed for typical 1 W and 2 W Ku-band Block
    Up-Converters (BUCs)*

* 2 kg or 4.5 lb max. weight for RF electronics (BUC and LNB)

Download Hoja de Datos en PDF